Solid Input Shaft and Hollow Output Shafts Bevel Gearbox

• Customization: Available
• Application: Motor, Electric Cars, Machinery, Agricultural Machinery
• Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
• Model NO.: JTPH65-JTPH280
• Layout: 90 Degree, Right Angle
• Hardness: Hardened Tooth Surface
• Installation: Horizontal Type
• Step: Single-Step
• Type: Spiral Bevel Gear Box
• Gear Ratio: 1:1, 1.5:1, 2:1, 3:1, 4:1, 5:1
• Mouting Type: Universal
• Drive Shaft Diameter: 13-60 mm, Custom
• Power: Maximum 1.1-155 Kw
• Torque: Maximum 7-1200 N.M
• Speed: Maximum 1500 Rpm
• Efficiency: 94%-98%
• Shafts Configurations: 2-Way(2 Shafts), 3-Way(3 Shafts), 4-Way (4 Shafts)
• Rotation Directions: Forward or Reverse
• Structures: Bevel Gears, Input Shaft, Output Shafts, Gearboxes
• Warranty: 12 Months
• Assembly Drawing: 3D Model, 2D Drawing
• Transport Package: Standard Exporting Plywood Cases
• Trademark: JACTON
• Origin: Guangdong, China
• HS Code: 8483409000
• Production Capacity: 9999sets/Month

Product Description

Product Description

* Gear ratios: 1:1, 2:1, 3:1, 4:1 and 5:1 are actual ones.
* Ultra Compact Design. All-round machined symmetrical housing, and all-round tapped holes for universal mounting, 6 possible mounting positions.
* Power range from 0.1kw to 156kw, Torque range from 11.5Nm to 1199Nm.
* Gear transmission average efficiency up to 94%. 
* 2-way, 3-way and 4-way Configurations. Allows both horizontal and vertical shafts.
* Various Shafts Arrangements, Rotation Directions and Mounting Positions available.
* High efficiency, high transmission capacity, low backlash, noiseless operation, low running temperature and long service life.

Product Material

We use the best materials to guarantee the performance and lifetime of the bevel gearboxes you purchased.
* Housing: High rigidity Cast Iron. Customized aluminum and stainless steel, galvanic coating or other corrosion resistance painting.
* Spiral Bevel Gears: High purity rugged alloy steel 20CrMnTi, Carburizing and Quenching, Case Hardened and Lapped in Pairs.
* Input Shaft and Output Shaft: Hardened and tempered alloy steel 40Cr as standard. Custom Stainless Steel 304 or 316.
* Bearing: Equipped with Tapered Roller Bearings with heavy load capacity. Custom reinforced bearings for higher radial and axial load. Custom Stainless Steel 304.
* Oil Seals: Double-lip Oil Seal, High Dust-proof and Oil leak proof.
* Lubricants: Applications with high speeds and/or high daily duty cycle, Gear oil #320 lubrication is recommended. But applications with low input speed (less than 200rpm) and low daily duty cycle, #0 or #00 lithium grease is recommended. Note: For input speeds 1500 rpm a change in oil level may be required in combination with a breather (vent).

Product Parameters

Product Dimensions

Find out front view, side view and top view assembly drawings.

* Free 2D AutoCAD Assembly Drawings (PDF, DWG, DXF Format).
* Free 3D CAD Model Assembly Drawings (STP/STEP, IGS/IGES, SLDPRT, MODEL, CATPART Format).

Quality Inspection

Before packing, all Customers' orders will be inspected following Production Drawings and Inspection Report.
* Inspection of Screw Jack: model, screw diameter, screw pitch, installation type, basic design, stroke length, screw end types, wormgear ratio, worm shaft diameter, input shaft types, motor flange types, accessories, lubrications, housing color, orders with special requirements, smooth lifting.
* Inspection of Bevel Gearbox: model, input shaft diameter, output shaft(solid or hollow) diameter, input flange dimensions, shaft arrangements, rotation directions, mounting positions, gear ratios, accessories, lubrications, housing color, orders with special requirements.
* Inspection of Lifting System: except above points, must inspect the order quantities of jacks, gearboxes and others.

Packaging & Shipping

100% standard exporting plywood cases (international exporting standard wooden material with free fumigation).
* Express(Air Courier): Factory to customers' company by FEDEX, DHL, UPS, TNT. Incoterms: EXW, DDU.
* Sea Freight: Factory to destination seaport by Vessel. Incoterms: CIF, FOB, EXW, CFR.
* Air Freight: Factory to destination airport by Airplane. Incoterms: CFR, EXW, FCA, CPT, CIP.
* Additional Options (Door to Door): Train Transportation, Truck Transportation, Ocean Shipping.

Clients Distribution Countries

* Asia: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Sri Lanka, Israel, Jordan, Kuwait, Qatar.
* America: United States, Mexico, Canada, Chile, Bolivia, Brazil, Colombia, Dominican Republic, Honduras, Argentina, Peru.
* Europe: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
* Australia: Australia, New Zealand, Fiji.
* Africa: South Africa, Egypt, Ethiopia, Nigeria.

Other Products